high wear-resistant copper shaft lining

10-1Copper shaft lining, high wear-resistant copper shaft lining, environmentally friendly recyclable copper shaft lining. Using excellent electrolytic copper as the matrix, tin ingots are mixed according to the national standard proportion to form high wear-resistant copper alloy materials. High hardness, excellent wear resistance, not easy to bite the phenomenon, has a better casting performance and cutting performance, in the atmosphere and fresh water has a good corrosion resistance. Used at high load (20MPaBelow) and high sliding speed

（8m/sThe wear-resistant parts under the working condition are the first choice for rubber and plastic machinery, ships and so on. 

Product Name:10-1Tin bronze bushing 

Material brand:ZQSn10-1

Casting mode: centrifugal casting 

Products: wear resistant copper bushingMaterial name: cast copper alloy

●10-1Tin bronze

●Brand name:ZCuSn10P1

●Standard:GB/T 1176-1987

●Chemical composition: 

Copper Cu: the rest

Tin Sn:9.0 ~ 11.5

Zinc Zn: < 0.05 (impurities) Lead Pb: < 0.25 (impurities) Phosphorus P: 0.5-1.0

Nickel Ni: < 0.10 (impurity) aluminum Al: less than 0.01 (impurity) iron Fe: < 0.1 (impurity) Mn Mn: < < 0.05 (impurity) Si: < 0.02 (impurity) Sb: < < 0.05 (impurity))

Sulfur S: less than 0.05 (impurity)

●Mechanical properties: 

tensile strengthSigma B (MPa)：More than 310Yield strengthSigma (MPa)：More than 110elongationDelta 5 (%)：More than 12hardness ：More than 520HB (reference value)

●Heat treatment specification: heating temperatureOne thousand one hundred and eighty-eight～One thousand two hundred and twentyCentigrade; pouring temperatureOne thousand one hundred and fifty～One thousand and two hundredCentigrade. 

●Casting method: centrifugal metal casting